April 22, 2008

City of Atlanta Updates its City Arborist List


The Arborist Division of the Atlanta City Government regularly updates a list of their city Arborists. There are four municipal field personnel, each responsible for a quadrant. They are:

Area 1: Tom Coffin 404.330.6077
Area 2: Janell Bazile 404.330.6071
Area 3: Paul Lewkowicz 404.330.6882
Area 4: Michael Franklin 404.330.6079

For final inspections, contact Stanley Domengeaux 404.546.1047

The Arborist Division is esponsible for reviewing and approving all building permits and tree removal plans.

April 18, 2008

How To Measure the Height of a Tree


On September 7, 2006 the San Francisco Chronicle reported that researchers had just discovered a 378 foot (113 meters) tall tree that is probably the world's tallest living tree. If you think you can find a tree that can break that record, or just want to measure that tree in your backyard, try these techniques. These methods can also give you a good approximation of the heights not only of trees, but also of telephone poles, buildings, magic beanstalks—pretty much anything tall.

Steps


Shadow Method


  1. Know your exact height in the shoes you will be wearing to perform this method.
  2. Stand next to the tree or the object to be measured. For best results, do this method on a bright, sunny day. If the sky is overcast, it may be difficult to tell exactly where the shadow’s tip is
  3. Measure the length of your shadow. Use a tape measure or yardstick (meter ruler) to measure your shadow from your feet to the tip of your shadow. If you don’t have someone to assist you, you can mark the end of the shadow by tossing a rock onto it while you’re standing. Or better yet, place the rock anywhere on the ground, and then position yourself so the tip of your shadow is at the rock; then measure from where you're standing to the rock.
  4. Measure the length of the tree’s shadow. Use your measuring tape to determine the length of the tree’s shadow from the base of the tree to the tip of the shadow. This works best if the ground all along the shadow is fairly level; if the tree is on a slope, for example, your measurement won’t be very accurate. You want to do this as quickly as possible after measuring your shadow, since the sun’s position in the sky (and hence the shadow length) is slowly but constantly changing. If you have an assistant, you can hold one end of the measuring tape while he or she measures the tree’s shadow, and then you can immediately measure your shadow.
  5. Calculate the tree’s height by using the proportion of your shadow’s length to your height. Since you know the length of the tree’s shadow, and you also know that a certain height (your height) produces a certain shadow length (the length of your shadow), you can determine the tree’s height with a little math. Multiply the length of the tree’s shadow by your height, and then divide the resulting number by the length of your shadow. For example, if you are 5 feet (1.5 meters) tall, your shadow is 8 feet (2.4 meters) long, and the tree’s shadow is 100 feet (30.48 meters) long, the height of the tree is (100 x 5) / 8 = 62.5 feet (30.48 x 1.5 meters) / 2.4 meters. Note that the order of your multiplication does not matter.

Pencil Method: Requires an Assistant


  1. Stand far enough from the tree so you can view the whole tree—top to bottom—without moving your head. For the most accurate measurement, you should stand so that you are on a piece of ground that is about level with the ground at the tree’s base. Your view of the tree should be as unobstructed as possible.
  2. Have a friend stand near the tree.
  3. Hold a pencil or a small, straight stick (such as a paint stick or ruler) in one hand and stretch your arm out so that the pencil is at arm’s length in front of you (between you and the tree).
  4. Close one eye and adjust the pencil up or down so that you can sight the very top of the tree at the top of the pencil. This is easiest if you turn the pencil so that the sharpened point is pointing straight up. The tip of the pencil should thus just cover the top of the tree in your line of sight as you look at the tree “through” the pencil.
  5. Move your thumb up or down the pencil so that the tip of your thumbnail is aligned with the tree’s base. While holding the pencil in position so that the tip is aligned with the tree’s top (as in step 3), move your thumb to the point on the pencil that covers the point (again, as you look “through” the pencil with one eye) where the tree meets the ground.
  6. Rotate your arm so that the pencil is horizontal (parallel to the ground). Keep your arm held straight out, and make sure your thumbnail is still aligned with the tree’s base.
  7. Have your friend move so that you can sight his or her feet “through” the point of your pencil. That is, your friend’s feet should be aligned with the pencil’s tip. He or she may need to move backward, sideways, or diagonally. Since, depending on the height of the tree, you may need to be some distance away from your friend, consider using hand signals (with the hand that is not holding the pencil) to tell him or her to go farther, come closer, or move to the left or right.
  8. Measure the distance between your friend and the tree. Have your friend remain in the place or mark the spot with a stick or rock. Then use a measuring tape to measure the straight-line distance between that spot and the base of the tree. If you don’t have a measuring tape you can pace out the distance, although this will not be as accurate. The distance between your friend and the tree is the height of the tree.

Angle of Elevation Method


  1. Measure the distance to a sighting position. Stand with your back to the tree and walk out to a point that is approximately level with the ground at the tree’s base and from which you can clearly see the tree’s top. Walk in a straight line, and use a measuring tape to measure your distance from the tree. You need not stand any set distance from the tree, but this method generally works best if your distance from the tree is about 1-1.5 times the height of the tree.
  2. Measure the angle of elevation to the tree’s top. Sight the top of the tree and use a clinometer or transit to measure the "angle of elevation" between the tree and the ground. The angle of elevation is the angle formed between two lines—the flat plane of the ground and your sightline, to some elevated point (in this case, the tree’s top) — with you as the vertex of the angle.
  3. Find the tangent of the angle of elevation. You can find the tangent of an angle using a calculator or table of trigonometric functions. The method for finding the tangent may differ depending on your calculator, but usually you just push the “TAN” button, enter the angle, and then press the “equal” button (=). Thus if the angle of elevation is 60 degrees, you simply push “TAN” and then enter “60” and then press the equal sign.
  4. Multiply your distance from the tree (measured in step 1), by the tangent of the angle of elevation. The resulting number is the height of the tree minus your height.
  5. Add your height to the height you calculated in the previous step. Now you have the height of the tree. You need to add your height because you measured the angle of elevation from eye level, not from the ground.

Fixed Angle of Elevation Method


  1. Fold a square piece of paper in half so that it forms a triangle. The triangle will have one right (90 degree) angle and two 45 degree angles.
  2. Hold the triangle near one eye so that the right angle faces away from you and one side is horizontal (parallel to the ground, assuming the ground is level).
  3. Move back from the tree until you can sight the top of the tree at the top tip of the triangle. Close one eye to sight the tree’s top. You want to find the point where your line of sight follows the hypotenuse of the triangle to the very top of the tree.
  4. Mark this spot and measure the distance from it to the base of the tree. This distance, plus your height(because you used the angle of elevation from eye level, not from the ground)is also the height of the tree. This works because the angle of elevation using your triangle is 45 degrees, and the tangent of 45 degrees = 1.

Tips


  • Realize that many times using DBH (diameter at breast height) is a more useful and much easier way of assessing a tree's size and age.
  • For increased accuracy using the shadow method you can measure the shadow cast by a yardstick or similar straight stick of known height instead of a person’s height. Depending on how you are standing, your height may vary (i.e., if you are slouching or tilting your head slightly).
  • You can improve the accuracy of the pencil method and the angle of elevation methods by taking several measurements from different points around the tree.
  • Be consistent with your units of measurement (multiply and divide feet by feet or inches by inches, for example.)
  • Clinometers and transits are tools which allow you to measure the angle between a horizontal plane and the object you are looking at (the transit, in particular, also is used to measure angles between vertical planes). You want to measure the angle between the ground and the tree’s top, but the clinometer or transit will measure the angle between the horizontal plane at your eye level (since you look through the instrument), and this is why you need to add your height to the calculation. Some clinometers and transits, however, allow you to adjust for your eye height. If you have already adjusted for your height do not add your height at the end of the calculation.
  • Many trees are not perfectly vertical—they don’t grow straight up. Using the angle of elevation methods you can adjust for an angled tree by measuring the distance between you and the point on the ground that lies directly below the tree’s top, rather than measuring the distance between you and the base of the tree.
  • You can make a simple clinometer very easily using a protractor. Check out the related wikiHow for instructions.
  • This can be a fun activity for 4th to 7th grade kids.

Things to Consider


  • These methods do not work well if the tree is on sloping ground.
  • While the angle of elevation methods, if used correctly, can calculate the correct height within 2-3 feet, there is abundant opportunity for human error, especially if the tree is angled or on a slope. If precision is absolutely necessary, consult your local extension service or other such agency for assistance.

Things You'll Need


  • A friend (optional for three of the methods, but a little help makes the process easier and more fun)
  • A pencil or ruler
  • A tape measure or yardstick/ meter ruler
  • A clinometer or square piece of paper

Sources and Citations




Article provided by wikiHow, a collaborative writing project to build the world's largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Measure the Height of a Tree. All content on wikiHow can be shared under a Creative Commons license.

April 9, 2008

Amazing Flowering Dogwood Tree is Now Historic


Think you've seen some awesome Dogwoods? Try this one out. Athens, Georgia is home to a monster Cornus.

I first saw this specimen in 1996, when I was touring the Hospital grounds in preparation for some tree pruning. I remember thinking that it should be on some kind of "Big Tree List" or something, but I was too preoccupied (lazy) to do anything about it.

The Georgia Urban Forestry Council inducted the tree into its own Historic Tree Register this year. It is located directly beside Prince Avenue at Athens Regional Medical Center. It measures 24" inches in diameter at the base and it is in perfect condition. Next to the tree is a plaque noting its date of planting as 1951, by Charles L. Pope. The majority of the residents regard this tree as one of the largest Dogwood trees in the state of Georgia.

If you would like to write the tree a letter, its address is 1199 Prince Avenue, Athens GA. Or you can just take a trip and see it at Athens Regional Medical Center. Please observe regular visiting hours.

April 3, 2008

Tree Care Handbook Vol. 1, Flowering Dogwood


Onebark Consulting Arborist has announced the pre-release of the Tree Care Handbook, Volume 1, first of a series of free technical manuals on the care of specific tree species. This particular release covers crucial instruction for the care of the Flowering dogwood Cornus florida.

How is this handbook different from other related articles? The Tree Care Handbook series contains aggregate information from treatises, US government publications, and forestry texts; and most importantly, draws upon the profound knowledge of experienced professional tree care practitioners.

The handbook series is designed to:
Weed out erroneous and generic advice from the art of tree care
Highlight best management practices for trees
Promote strong links between online tree care sources

Please come back and comment here after downloading the handbook. Feedback regarding the handbooks will be considered for future volume releases.

Download Tree Care Handbook Vol.1, Flowering Dogwood.